Skip to main content

PocketJig200ST™

PocketJig200
PocketJig200
PocketJig200
Interactive View

1331

PocketJig200ST™

Simple, Quick, Precise Pocket Hole Jig Kit

$29.99

View Replacement Parts
<< Back
PocketJig200ST™ - Replacement Parts

The Milescraft® PocketJig200ST™ allows you to connect your workpieces quickly with strong and accurate pocket hole joints. Create corner joints, edge joints, T-joints, framing joints, miter joints, and make repairs. With built-in settings for different board thicknesses, just set this pocket jig to your desired setting, set the depth of your bit, and start drilling. This complete kit in a sturdy carrying case comes with all of the bits, drivers, screws and accessories needed to complete any pocket hole project.

PocketJig200ST™ Pocket Hole Jig Kit – Designed To Make Repairs Simple

  • Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop

Built-In Imperial And Metric Scales

  • The built-in scales allow you to easily measure the thickness of your workpiece

Board Thickness Settings

  • There are four common board thickness settings built into the pocket jig: 1/2″, 3/4″, 1″ and 1-1/2″ (12, 19, 27, 38mm)
  • Easy readout arrow to help define your board thickness setting
  • Easily adjust to your board thickness setting with the single sled design and sled adjust button

Hardened Steel Drill Bushings

  • For precise and accurate pocket holes every time using the Milescraft PocketBit™
  • Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try

Recessed Clamp Pocket with Magnet

  • Helps to keep the clamp in the same position as you move to different locations
  • With the stronger rare earth magnet, you can easily clamp the jig from one location to another
  • For speed and accuracy, use the Milescraft FaceClamps™

Convenient Built-In Depth Setting

  • Easily set your bit for the correct drilling depth

3/8″ HSS Step Drill Bit

  • Made from high-speed steel the PocketBit is designed to reduce clogging and provide smooth and precise holes

3/8″  Stop Collar

  • Precise drilling depth
  • Includes hex key for tightening

 6″ Magnetic T20 Torx® Driver

  • For maximum torque settings without stripping
  • To allow pocket screws to align with maximum precision

Storage Case

  • Small design for compact strorage

Specs

  • Material:

    Reinforced Nylon

  • Drill Guide Bushing Spacing:

    1″

  • Clamping Method:

    Works with any clamp

  • For use with:

    Wood Materials for 1/2″ to 1.5 thick (12-38mm)

  • Drilling Angle:

    15°

  • Screw and Driver Style:

    T20 Torx

  • Screws:

    10 of each: 1” (25mm), 1.25” (32mm) coarse and fine, 1.5” (38mm), 2” (51mm), 2.5” (64mm)

  • Drivers:

    6″ T20 Magnetic Head Driver

  • Pocket Plugs:

    10 plugs

  • Drill Bit:

    3/8″ (9.5mm) HSS Pocket Bit

  • Includes:

    Double Barrel Pocket Hole Jig, 6″ T-Star Driver Bits, 3/8″ PocketBit™, 60 Piece T20 Pocket Hole Screws, Pocket Plugs, 3/8″ Stop Collar with Hex Key and Instruction Manual

FAQs

Always be sure your drill is set to the highest speed and lowest torque and the drill bit is in the bushing before powering up the drill and contacting any wood surfaces.

Reviews

No reviews to show

Reviews

There are no reviews yet

Add a review
PocketJig200ST™ PocketJig200ST™
Rating*
0/5
* Rating is required
Your review
* Review is required
Name
* Name is required
* Please confirm that you are not a robot
Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.