Whether working in the shop or out in the field, more control on a workpiece increases safety and produces better, more accurate cuts. The FeatherBoard+™, by Milescraft, is a modular safety system that expands the versatility and improves safety over standard feather boards and delivers results.

The FeatherBoard+™, by Milescraft, can be configured in over 10 different setups on table saws, band saws, routers tables, & fences. For the tabletop, use a single feather board to apply pressure against the fence, or interlock both for a longer contact zone.  When cutting taller pieces, stack them high! Use the included spacer blocks for even more range. On the fence, use the FeatherBoard+™ to apply downward pressure to keep workpieces flat on the table saw, or place them on the infeed and outfeed side of router tables. Alternatively, combine both setups in tandem to maximize contact and control to have the best of both worlds!

Each FeatherBoard+™ kit comes with two different sets of replaceable, protective feathers to dial in control of your stock. With the 40 Degree feathers installed, work glides smoothly along the fence and surface as the independent feathers provide pressure against the fence and help reduce kickback. Swap to the included 15 Degree set of feathers which feature a stiffer design and provide more pressure. Each individual feather can be rotated to change the feed direction for any setup or style and are replaceable if damaged.

In order to increase the compatibility with shop tools, the FeatherBoard+ is ready to connect to multiple standard connections. Two ¾” spreadable miter bars fit into standard miter tracks, while a pair of 5/8” bars fit into smaller benchtop tools or vintage table saws. It also includes three 1/4-20 T-Bolts for standard T Track connections. Just crank down on the large rubber coated knobs for quick and easy tightening while applying maximum torque.

Stop winging it when it comes to workshop safety. Add total control and versatility to your setup with the Milescraft FeatherBoard+.

Customizable Setup

• Modular, interlocking, stackable design for single, dual, and tandem configurations.

Versatile Use

• Compatible with table saws, router tables, band saws, and fences.

Kickback

• Flexible feathers allow stock to glide through and reduce kickback.

Stock Protection

• Non-marring finish protects workpiece

Adjustable Pressure

• Includes 40° and 15° feather sets to customize workpiece pressure.

Feathers

• Feathers are replaceable if damaged, and reversible to change feed direction.

Easy Tightening

• Large rubber-coated knobs provide comfortable tightening and strong holding power.

Secure Fit

• Expanding miter bars help secure the featherboard in the miter slot.

Broad Compatibility

• Includes hardware for 3/4″ and 5/8″ miter slots and 1/4-20 T-tracks.