PocketJig200™
PocketJig200™
Simple, Quick, Precise Pocket Hole Jig Kit
Simple, Quick, Precise Pocket Hole Jig Kit
Original price was: $29.99.$22.49Current price is: $22.49.
PocketJig200™ - Replacement Parts
- 70157 - Connector $5.28
- 70190 - 3″ T20 Driver $2.64
- 70191 - 6″ T20 Driver $3.96
- 60192 - 3/8″ Split Ring Stop Collar with Flat $2.32
- 60298 - PocketJig200 (Jig Only) $20.45
- 70237 - 3mm Hex Key $1.32
- 70340 - 3/8″ Pocket Hole Bit $12.53
The Milescraft® PocketJig200™ allows you to connect your workpieces quickly with strong and accurate pocket hole joints. Create corner joints, edge joints, T-joints, framing joints, miter joints, and make repairs. With built-in settings for different board thicknesses, just set this pocket jig to your desired setting, set the depth of your bit, and start drilling. This complete kit in a sturdy carrying case comes with all of the bits, drivers, screws and accessories needed to complete any pocket hole project.
PocketJig200™ Pocket Hole Jig Kit – Designed To Make Repairs Simple
- Spring-loaded sled adjust button allows the jig to be set to do repairs of any nature around your home or your shop
Built-In Imperial And Metric Scales
- The built-in scales allow you to easily measure the thickness of your workpiece
Board Thickness Settings
- There are four common board thickness settings built into the pocket jig: 1/2″, 3/4″, 1″ and 1-1/2″ (12, 19, 27, 38mm)
- Easy readout arrow to help define your board thickness setting
- Easily adjust to your board thickness setting with the single sled design and sled adjust button
Hardened Steel Drill Bushings
- For precise and accurate pocket holes every time using the Milescraft PocketBit™
- Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try
Recessed Clamp Pocket with Magnet
- Helps to keep the clamp in the same position as you move to different locations
- With the stronger rare earth magnet, you can easily clamp the jig from one location to another
- For speed and accuracy, use the Milescraft FaceClamps™
Convenient Built-In Depth Setting
- Easily set your bit for the correct drilling depth
3/8″ HSS Step Drill Bit
- Made from high-speed steel the PocketBit with a 1/4″ hex shank is designed to reduce clogging and provide smooth and precise holes
3/8″ Anti-roll, Split Design Stop Collar
- The split design prevents slipping of the set screw when tightened and prevents the bit from rolling
- Includes hex key for tightening
Quick Change Compatible Connector
- With the Milescraft Connector, you can quickly change from drilling to driving
- Accepts all 1/4″ hex bits
- Quickly and easily change from drilling to driving
3″ and 6″ Magnetic T20 Torx® Drivers
- For maximum torque settings without stripping
- To allow pocket screws to align with maximum precision
Rugged Storage Case
- With designated places for components, you will never have to go digging through your toolbox for your pocket hole jig again
- Storage compartment for 2″ FaceClamp™
- Storage slot for PocketJig100
Verified ownerLike the stuff a lot. Makes my joints a lot better and tighter.
Verified ownerThis comes with a remarkable case. Everything fits.
Verified ownerI first purchased the HD PocketJig300 and was so pleased with it that I went for this smaller model. Great product at a great price.
I have always liked Milescraft products. Well built and good design. The pocket jig didn't disappoint, usual excellent quality
Awesome Product!! This pocket jig made my job so much easier to do I would recommend this to anyone that does woodwork.
